How to use glue to control rats? - briefly
Place non‑toxic adhesive boards along established rodent pathways, ensuring surfaces are clean and traps are secured to prevent displacement. Replace or refresh glue surfaces regularly to sustain capture efficiency.
How to use glue to control rats? - in detail
Adhesive devices provide a non‑chemical method for managing rodent populations in indoor and limited outdoor settings. Effective deployment requires understanding of trap selection, placement strategy, safety considerations, and post‑capture procedures.
Select traps designed for larger rodents; commercial glue boards typically measure 6 × 6 inches or larger and feature a non‑toxic, high‑viscosity adhesive surface. Verify that the product complies with local regulations and carries a material safety data sheet confirming low toxicity for humans and pets.
Placement follows these principles:
- Identify active pathways: walls, baseboards, near food storage, and concealed routes such as behind appliances.
- Position traps perpendicular to travel routes, with the adhesive side facing the expected direction of movement.
- Secure traps to a flat surface using the provided backing or double‑sided tape to prevent displacement.
- Keep traps out of reach of children and non‑target animals; use enclosed bait stations when necessary.
Safety measures include wearing disposable gloves during handling, avoiding direct skin contact with the adhesive, and placing traps on surfaces that can be discarded without contaminating food‑preparation areas. In case of accidental contact, remove the adhesive with mineral oil or a dedicated adhesive remover, then wash the area with soap and water.
After capture, dispose of trapped rodents according to local waste‑management guidelines. Seal the entire trap in a plastic bag before discarding to prevent accidental release. Replace traps promptly, as adhesive effectiveness declines after a few days of exposure to dust and humidity.
Regular monitoring enhances success: inspect traps daily, record capture rates, and adjust placement based on observed activity patterns. Combine adhesive devices with sanitation measures—eliminate food spillage, store waste in sealed containers, and seal entry points—to reduce attraction and prevent reinfestation.