How do you use a glue trap for mice? - briefly
Place the sticky board along walls, behind appliances, or near visible mouse pathways with the adhesive side up, then inspect it daily, wearing gloves to remove any caught rodents and discarding the trap according to local disposal guidelines.
How do you use a glue trap for mice? - in detail
A glue board designed for rodents must be handled with care to achieve effective control while minimizing risk to non‑target animals.
First, select a product that specifies suitability for mice. Verify that the adhesive surface is intact and the packaging is undamaged. Wear disposable gloves before any contact with the trap to prevent skin irritation and to avoid transferring scent that could deter pests.
Placement follows a logical pattern:
- Identify areas of activity: droppings, gnaw marks, or runways along walls, behind appliances, and beneath cabinets.
- Position the board perpendicular to the wall, with the sticky side facing the expected travel path. Mice prefer to move close to edges; align the trap within 1–2 cm of the wall surface.
- Secure the trap using tape or a small nail, ensuring it remains flat and does not wobble.
- Avoid locations where pets or children can reach the adhesive surface. If necessary, enclose the trap in a shallow container with a single opening toward the wall.
After deployment, inspect the board at regular intervals—typically every 12–24 hours. When a mouse is captured, note the time and condition of the trap. Do not attempt to free the animal; the adhesive causes rapid immobilization and prolonged suffering.
Disposal procedure:
- Place the captured trap into a sealable plastic bag while still wearing gloves.
- Add a second bag for double containment.
- Seal both bags and dispose of them in an outdoor trash receptacle that is collected regularly.
- Clean the surrounding area with a mild disinfectant to remove residual scent and reduce the chance of secondary infestations.
Additional considerations:
- Replace traps after a few captures or when the adhesive surface becomes saturated.
- Maintain a clean environment: eliminate food sources, store grain in airtight containers, and seal entry points such as gaps around pipes or vents.
- For severe infestations, combine glue boards with other control methods—snap traps, bait stations, or professional pest management—to achieve comprehensive reduction.
By following these precise steps, the adhesive device can be employed safely and effectively to manage mouse populations.