How to quickly make a mouse trap? - briefly
Cut a small piece of cardboard into a V‑shaped channel, position cheese at the narrow tip, and prop the open side with a spoon‑handle that releases when the mouse pulls the bait. The rapid collapse of the channel traps the rodent for easy removal.
How to quickly make a mouse trap? - in detail
To construct an efficient mouse trap in a short time, gather the following items: a sturdy cardboard box (approximately 30 × 20 × 20 cm), a wooden dowel or a thick chopstick, a small piece of strong adhesive tape, a bait such as peanut butter or dried fruit, and a pair of scissors.
- Cut a rectangular opening on one side of the box, about 5 cm high and 10 cm wide, near the top edge. The cut serves as the entrance for the rodent.
- Insert the dowel through the opposite side of the box, positioning it horizontally so that it can pivot upward when pressure is applied to the bait. Secure the dowel with a small piece of tape, leaving enough slack for movement.
- Apply a thin layer of bait to the end of the dowel that faces the entrance. The scent will attract the mouse and encourage it to step onto the lever.
- Fold a small flap from the same piece of cardboard and attach it over the entrance with tape, leaving a narrow gap that allows the rodent to push the bait forward. When the mouse moves the bait, the dowel will tip, causing the flap to close and trap the animal inside the box.
- Test the mechanism by gently pressing the bait; the flap should snap shut quickly and remain locked.
Safety considerations:
- Wear gloves when handling adhesive and bait to avoid contamination.
- Place the trap along walls or near known rodent pathways, as mice travel close to surfaces.
- Check the trap at least twice daily; dispose of captured rodents according to local regulations.
Optional enhancements: