How can you catch a mouse using a glue trap? - briefly
Place a baited glue board along mouse pathways—typically near walls, behind appliances, or close to food sources—and ensure it lies flat on a stable surface; inspect regularly and dispose of trapped rodents according to local regulations.
How can you catch a mouse using a glue trap? - in detail
Glue traps consist of a flat board coated with a non‑drying adhesive that immobilizes rodents upon contact. They are inexpensive, require no mechanical components, and can be positioned in tight spaces where other devices cannot reach.
Preparation
- Choose a trap designed for small rodents; boards typically measure 8 × 12 inches with a thick adhesive layer.
- Wear disposable gloves to avoid contaminating the surface with skin oils.
- Select a bait that appeals to mice: peanut butter, dried fruit, or small pieces of cheese work well. Apply a pea‑sized amount to the center of the board, spreading it thinly to prevent the mouse from escaping while feeding.
Placement
- Identify active runways by observing droppings, gnaw marks, or fresh footprints.
- Position the trap perpendicular to the wall, with the adhesive side facing the expected direction of travel.
- Place the trap 1–2 inches from the wall, as mice tend to run close to surfaces.
- Secure the board on a flat surface; avoid uneven floors that could cause the mouse to slip off.
- Use multiple traps in parallel paths if the infestation covers a larger area.
Monitoring
- Inspect traps every 12 hours during the first 48 hours; more frequent checks reduce suffering.
- Record the capture time and location to refine future placement.
- Once a mouse is immobilized, cover the board with a plastic bag, seal it, and dispose of it according to local regulations.
Disposal
- Place the sealed bag in a trash container with a tight‑fitting lid.
- Clean the surrounding area with a mild disinfectant to remove residual adhesive and odor.
- Wash hands thoroughly after handling the trap and gloves.
Safety precautions