How can rats be caught with glue? - briefly
Rats are trapped by positioning baited adhesive boards along established travel routes, where the sticky surface immobilizes them upon contact. Boards must be inspected regularly and removed according to local pest‑control guidelines.
How can rats be caught with glue? - in detail
Adhesive traps provide a passive method for controlling rodent infestations. The device consists of a flat board coated with a non‑toxic, high‑strength glue. When a rat steps onto the surface, its paws become immobilized, preventing escape.
Selection of trap
- Choose a board size that matches the target area (e.g., 12 × 12 inches for kitchen corners, larger panels for basements).
- Verify that the adhesive is rated for mammals and resistant to moisture.
Placement strategy
- Identify high‑traffic routes: along walls, near food sources, and close to entry points.
- Position the board with the glue side up, flush against the wall to force the animal to walk over it.
- Secure the trap to the floor or wall using nails or adhesive tape to prevent displacement.
Safety precautions
- Keep traps out of reach of children and non‑target pets.
- Wear disposable gloves when handling the board to avoid contaminating the adhesive.
- Seal captured rodents in a plastic bag before disposal; follow local regulations for pest removal.
Maintenance
- Inspect traps daily; replace boards once the adhesive loses tackiness or after a capture.
- Clean the surrounding area to remove droppings and scent trails that could attract additional rodents.
Effectiveness considerations
- Success depends on accurate placement along established pathways.
- Multiple traps increase capture probability in heavily infested spaces.
- Combining adhesive devices with exclusion measures (sealing gaps, proper food storage) enhances long‑term control.