What should you use to catch a mouse with glue? - briefly
Use a commercially‑produced adhesive mouse trap, which consists of a flat board coated with a strong, non‑toxic glue designed to immobilize rodents. Place the trap along walls or near known activity zones, and check regularly to remove captured mice.
What should you use to catch a mouse with glue? - in detail
To capture a rodent with an adhesive device, select a purpose‑designed glue board that conforms to local pest‑control regulations. The board should be made of sturdy cardboard or plastic, coated with a non‑toxic, fast‑acting adhesive that remains effective in the temperature range of the target area.
Bait the trap with food items that attract mice but do not interfere with the adhesive. Effective choices include:
- Small portions of peanut butter
- Sunflower seeds
- Bits of dried fruit
- Commercial rodent attractants
Apply a thin layer of bait directly onto the adhesive surface, avoiding excess that could smear and reduce stickiness.
Wear disposable gloves when handling the trap to prevent skin contact with the glue. Place the board along established mouse pathways: behind appliances, near wall baseboards, and within 12 inches of known activity. Ensure the trap is positioned flat on a stable surface to maintain full contact with the floor.
After capture, follow these steps:
- Cover the trapped mouse with a plastic bag to contain odors.
- Seal the bag and place it in a trash container with a tight‑fitting lid.
- Dispose of the bag according to local waste‑management guidelines.
- Clean the area with a mild disinfectant to remove residual adhesive.
If adhesive traps are prohibited or undesirable, consider alternatives such as snap traps, live‑catch cages, or electronic devices, each requiring appropriate placement and disposal procedures.