How to tie a rat – diagram? - briefly
Form a loop around the animal’s neck, bring the standing part over the loop, pull to create a slip knot, then tighten by drawing the tail end through the knot. A concise line diagram shows each step sequentially.
How to tie a rat – diagram? - in detail
The diagram presents a compact visual of the knot commonly referred to as the “rat” and serves as a reference for each stage of formation. The illustration is divided into four sections: the initial loop, the crossing of the working end, the formation of the second loop, and the final tightening.
Begin by forming a simple overhand loop with the rope’s standing part on the left and the working end on the right. Position the working end above the standing part and pass it under the standing part to create the first crossing. Pull the working end through the loop created by this crossing, forming a secondary loop that mirrors the first.
Next, rotate the secondary loop clockwise so its opening aligns with the original loop’s opening. Thread the working end through this opening, ensuring it passes beneath the standing part a second time. The working end should now lie parallel to the standing part, with both loops side by side.
Secure the knot by pulling the standing part while simultaneously drawing the working end outward. The loops will collapse into a compact, symmetrical shape. Verify that the knot holds by applying tension to both ends; the structure should resist slipping.
Key points for successful execution:
- Maintain tension on the standing part during each crossing to prevent slack.
- Ensure the working end passes completely beneath the standing part at each step.
- Align the loops precisely before the final tightening to achieve a neat appearance.
- Test the knot under load before use in any application.
The diagram’s labels correspond directly to these actions, allowing a practitioner to follow the visual cues without additional explanation. Mastery of this knot provides a reliable method for binding objects where a compact, low‑profile knot is required.