How to sew a rat-shaped toy? - briefly
Cut fabric into head, body, ears, tail, and limb pieces matching a rat silhouette, sew each pair right‑sides together leaving a small gap, then join the components with the gap still open. Turn the assembly right‑side out, fill with fiberfill, and stitch the opening closed.
How to sew a rat-shaped toy? - in detail
Begin by gathering the necessary supplies: medium‑weight cotton or fleece fabric in a neutral color for the body, a contrasting piece for the ears and tail, a pair of fine‑point sewing needles or a sewing machine with a 4‑mm needle, polyester stuffing, sharp fabric scissors, pins, a fabric marker, and a thread that matches each fabric piece.
Create a simple pattern. Draw a silhouette of a rat on paper: a rounded head about 5 cm in diameter, a cylindrical body 12 cm long, two triangular ears 3 cm tall, and a tapered tail 15 cm long. Cut the drawing into separate pieces, then trace each onto the fabric, adding a 0.5 cm seam allowance around every edge. Cut two identical body pieces, two ear pieces, and one tail piece.
Pin the fabric layers together, right sides facing each other. For the body, sew around the perimeter using a 3‑mm stitch length, leaving a 5 cm opening near the rear for stuffing. Reinforce the ear attachment points by stitching a small square of interfacing to the head area before sewing the ears. Sew the ears separately: align right sides, stitch around, turn inside out, and press flat. Attach each ear to the head by stitching through the reinforced squares.
Prepare the tail by folding the long edge inward 0.3 cm, stitching a straight seam, then turning the tube inside out so the seam hides on the underside. Pin the tail to the rear edge of the body, aligning the raw edges, and sew a narrow seam to secure it.
Turn the entire body right side out through the opening. Fill gradually with polyester stuffing, distributing material evenly to avoid lumps. Once the desired firmness is achieved, close the opening with a hidden slip stitch or a small invisible stitch using a needle and matching thread.
Add finishing details. Embroider a thin line for the whiskers, a small black dot for the nose, and a short line for the mouth using a contrasting thread. If desired, attach a tiny piece of felt for the eyes, securing it with a few discreet stitches.
Inspect the toy for loose threads or uneven stuffing, trim any excess, and press gently with a low‑heat iron to smooth seams. The completed plush rat is now ready for play or display.