How should mouse glue be used correctly? - briefly
Apply a thin, even coat of glue to the mouse’s base, let it become tacky, then press the mouse firmly onto the intended surface for several seconds to ensure full contact. Remove any excess and allow the adhesive to cure completely before normal operation.
How should mouse glue be used correctly? - in detail
Mouse adhesive must be applied according to a defined procedure to ensure effectiveness and safety. Begin with a clean work surface; remove dust, oil, and residues using a solvent compatible with the substrate. Dry the area completely before proceeding.
Prepare the adhesive by shaking the container for at least 30 seconds to achieve uniform viscosity. If the product requires dilution, follow the manufacturer’s ratio precisely, measuring with a calibrated syringe or graduated cylinder. Do not exceed the recommended concentration, as this can alter bonding strength and cure time.
When applying the glue, use a fine‑point applicator to deposit a thin, continuous line or spot where the mouse will be positioned. Avoid excess buildup, which can cause slippage or uneven curing. Place the mouse gently onto the adhesive, ensuring full contact with the intended surface. Press lightly for 1–2 seconds to eliminate air pockets.
Allow the bond to set for the time specified on the label, typically ranging from 5 minutes to 30 minutes depending on temperature and humidity. Maintain a stable environment; avoid drafts, direct sunlight, or rapid temperature fluctuations during curing.
After the glue has cured, verify attachment strength by applying a modest lateral force. If the mouse detaches, re‑apply adhesive following the same steps, checking for surface contamination or insufficient cure time.
For removal, soften the adhesive with a recommended solvent or warm water, then lift the mouse carefully to prevent damage to the underlying surface. Clean any residual glue with the same solvent, then rinse and dry the area.
Store the remaining adhesive in its original sealed container, away from direct light and extreme temperatures. Record the opening date on the label; most formulations remain effective for 12 months after opening.