How should glue for mice be applied? - briefly
Spread a thin, uniform coat of the adhesive onto a flat, non‑porous surface, extending coverage at least 1 cm beyond the intended trap area and avoiding edges where the glue may peel. Allow the layer to set for 5–10 minutes before placing the trap in high‑traffic zones such as walls, corners, or along known mouse pathways.
How should glue for mice be applied? - in detail
Applying adhesive traps for rodents requires precision and safety. Prepare the work area by clearing debris and ensuring adequate lighting. Wear disposable gloves to prevent skin exposure to the sticky surface. Open the trap package carefully, avoiding contact with the adhesive side.
Place the trap on a flat, dry surface. Position it perpendicular to the wall, with the adhesive facing outward. Align the trap along established mouse pathways: near walls, behind appliances, under cabinets, and close to food sources. Space multiple traps 10–15 cm apart in high‑traffic zones to increase capture probability.
Secure the trap using the built‑in adhesive backing or a small amount of tape. Do not use excessive force that could damage the trap or create uneven contact. Check the trap after 24 hours; if no capture occurs, relocate it to a different spot along the same route.
Dispose of captured rodents promptly. Submerge the trap in a sealed container of warm, soapy water to neutralize the adhesive, then place it in a biohazard bag for disposal according to local regulations. Clean the surrounding area with a disinfectant to eliminate residual scent that might deter further activity.
Maintain a regular monitoring schedule: inspect traps daily, replace them when the adhesive loses tack, and rotate placement to cover new activity zones. This systematic approach maximizes effectiveness while minimizing risk to non‑target species and humans.