How should glue be used for catching mice? - briefly
Apply a thin, non‑toxic glue strip on a flat surface in areas with confirmed mouse activity, securing it to keep pets and children away. Inspect the trap regularly and dispose of any captured rodents in accordance with local regulations.
How should glue be used for catching mice? - in detail
Adhesive traps must be placed where rodents travel, such as along walls, behind appliances, and near food sources. The surface should be clean and dry; dust, grease, or moisture reduce effectiveness. Use a thin, non‑porous material (cardboard or plastic) as a base, then apply a uniform layer of commercial glue, ensuring no gaps or bubbles.
Preparation steps
- Clean the chosen area with a mild detergent, rinse, and dry thoroughly.
- Cut the base material to fit the target zone, typically 4–6 inches wide.
- Spread the adhesive evenly, covering the entire surface.
- Allow the glue to set for the manufacturer‑specified time before deployment.
Placement guidelines
- Position traps perpendicular to the wall, with the sticky side facing upward.
- Secure the trap to prevent displacement by pets or children, using tape or a low‑profile holder.
- Install multiple traps at intervals of 12–18 inches along known runways.
Monitoring and maintenance
- Inspect traps at least once daily; captured rodents will be immobilized within minutes.
- Remove trapped animals promptly to prevent suffering and decomposition, which can attract insects.
- Replace the adhesive surface when it becomes saturated with debris or loses tack.
Disposal protocol
- Wear disposable gloves when handling trapped rodents.
- Place the entire trap in a sealed plastic bag, then discard according to local waste regulations.
- Clean the surrounding area with a disinfectant after removal.
Safety considerations
- Keep traps out of reach of non‑target species, especially pets and wildlife.
- Store unused glue in a sealed container, away from heat sources and children.
- Follow the product’s material safety data sheet for proper handling and first‑aid measures.
Effectiveness factors
- Temperature influences adhesive performance; optimal range is 65–85 °F (18–29 °C).
- High humidity can cause the glue to dry out or become overly sticky, reducing capture rates.
- Regularly rotate trap locations to address shifting rodent pathways.
Applying adhesive traps with these precise actions maximizes capture efficiency while minimizing hazards to humans and non‑target animals.