How is mouse glue used? - briefly
Mouse glue is a viscous adhesive applied to trap surfaces or bait stations, where it immobilizes rodents upon contact; it is typically spread thinly with a brush or dispenser and left undisturbed until capture.
How is mouse glue used? - in detail
Mouse glue, a non‑toxic adhesive formulated to capture rodents, is applied directly to surfaces where mice travel or hide. The product is supplied in a solid block or sheet that can be cut to size, then placed on a flat, dry area such as along baseboards, behind appliances, under cabinets, or in corners of closets. Once a mouse steps onto the tacky surface, its feet become stuck, preventing further movement.
The typical procedure includes the following steps:
- Identify high‑traffic zones by looking for droppings, gnaw marks, or nesting material.
- Clean the target area to remove dust, grease, or moisture that could reduce adhesion.
- Cut the glue sheet to a manageable length, usually 2–4 inches (5–10 cm), handling it with gloves to avoid skin contact.
- Position the adhesive with the sticky side up, securing it with a small piece of tape if needed to keep it flat.
- Check the trap daily; replace or dispose of it when a mouse is captured or when the adhesive loses effectiveness.
Safety precautions are essential. Keep the product away from children and pets, store it in a sealed container, and wear disposable gloves during handling. Captured rodents should be removed with a tool such as tweezers or a disposable bag, placed in a sealed container, and disposed of according to local regulations.
For extended control, combine glue traps with sanitation measures: seal entry points, eliminate food sources, and maintain a clutter‑free environment. This integrated approach maximizes the effectiveness of the adhesive traps and reduces the likelihood of reinfestation.