How do I use mouse glue called “Clean Home”?

How do I use mouse glue called “Clean Home”? - briefly

Apply a thin, even coat of Clean Home adhesive to the trap surface and allow it to become tacky before positioning the trap near suspected mouse pathways. Inspect the trap each day and dispose of any captured rodents in compliance with local health guidelines.

How do I use mouse glue called “Clean Home”? - in detail

To employ the mouse adhesive marketed as Clean Home, follow these precise steps.

1. Preparation

   • Verify that the area is free of food debris, pet waste, and cleaning chemicals.
   • Ensure the surface is dry; moisture reduces the effectiveness of the adhesive.
   • Wear disposable gloves to avoid skin contact with the sticky compound.

2. Placement

   • Open the container carefully; the glue is supplied in a sealed pouch or tube.
   • Apply a thin, continuous strip of the adhesive to the back of a flat trap or directly onto a discreet spot where mouse activity has been observed.
   • Position the trap along walls, behind appliances, or under cabinets, aligning it with the mouse’s natural travel routes.
   • Press the adhesive firmly for 5–10 seconds to secure it to the surface.

3. Safety precautions

   • Keep the product out of reach of children and non‑target animals.
   • Do not place traps within 12 inches of food preparation areas or open containers.
   • If accidental skin contact occurs, wash the area immediately with soap and water; avoid using solvents that may irritate the skin.

4. Monitoring and removal

   • Inspect traps daily. When a mouse is captured, dispose of the entire trap in a sealed bag before discarding it in an outdoor trash container.
   • Replace the adhesive strip with a fresh one if the trap remains unattended for more than 48 hours, as the glue can lose potency due to dust accumulation.

5. Troubleshooting

   • If no captures occur after a week, relocate the trap to a different high‑traffic zone.
   • For reduced stickiness, clean the surface with a mild alcohol solution, allow it to dry completely, then reapply the adhesive.
   • In case of accidental spillage, absorb the excess with paper towels and seal them in a plastic bag before disposal.

By adhering strictly to these procedures, the Clean Home mouse adhesive can be utilized effectively while minimizing hazards and ensuring proper waste management.