How to wash rat urine out? - briefly
Soak the contaminated surface with a mixture of warm water and enzymatic cleaner, scrub thoroughly, then rinse and apply a disinfectant. Allow the area to dry completely to eliminate residual odor.
How to wash rat urine out? - in detail
When rat urine contaminates a surface, act promptly to prevent absorption and odor. First, don disposable gloves and a mask to avoid direct contact with pathogens. Ventilate the area by opening windows or using an exhaust fan.
- Absorb liquid – Sprinkle a generous layer of absorbent material such as paper towels, cat litter, or baking soda over the wet spot. Allow it to sit for several minutes, then sweep or vacuum the dried residue into a sealed bag.
- Rinse – Apply warm water mixed with a mild detergent directly to the affected area. Scrub with a stiff brush to dislodge any remaining traces. Rinse thoroughly with clean water.
- Disinfect – Prepare a solution of 1 part bleach to 10 parts water (or use a commercial disinfectant rated against viruses and bacteria). Saturate the surface, let it remain for at least five minutes, then wipe away with disposable cloths.
- Neutralize odor – After disinfection, spread a thin layer of baking soda or activated charcoal over the spot. Leave for several hours, then vacuum or sweep up the powder.
- Dry – Use fans or a dehumidifier to dry the area completely, preventing mold growth.
- Dispose – Seal all contaminated materials, gloves, and cleaning tools in a plastic bag. Discard according to local hazardous waste guidelines.
For porous materials (carpet, upholstery, drywall) that cannot be fully cleaned, consider removal and replacement to eliminate lingering contamination. Regular inspection and sealing of entry points reduce future incidents.