How to remove rats using a truth stick? - briefly
«Position the truth stick along known rodent pathways; its ultrasonic vibration and built‑in repellent scent create an environment that rats avoid, prompting them to leave the premises». «Replace the device according to the manufacturer’s schedule, typically every two to three weeks, to ensure continuous deterrence».
How to remove rats using a truth stick? - in detail
The truth stick is a calibrated rod that emits a controlled ultrasonic pulse capable of disrupting the neural pathways of rodents. When positioned correctly, the pulse forces the animal to vacate the area without lethal injury.
Preparation begins with a thorough inspection of the infested zone. Identify all entry points, nesting sites, and active runways. Seal large openings, then place the rod near the highest concentration of activity, typically along walls or within concealed burrows. Attach a non‑toxic attractant to the tip to encourage contact.
Deployment procedure
- Insert the stick into the chosen location, ensuring the tip rests within 2–5 cm of the target surface.
- Activate the device by pressing the power button; the system will emit a 25 kHz pulse for a preset duration of 30 seconds.
- Observe the area for 10 minutes; rats will retreat to avoid the acoustic field.
- After the pulse, leave the stick in place for an additional 5 minutes to prevent re‑entry.
Post‑operation checks involve inspecting the rod for debris, cleaning the tip with a mild detergent, and resetting the timer. Replace the attractant weekly to maintain efficacy. Dispose of any dead rodents according to local regulations; the truth stick itself is reusable for up to 500 cycles.
Safety guidelines require wearing hearing protection when handling the device, as the ultrasonic output can affect nearby pets. Keep the rod away from electronic equipment to avoid interference. The method provides a humane, chemical‑free solution for rodent control in residential and commercial settings.