How to lay a mouse net? - briefly
Cut the net to the required dimensions, attach it securely to a frame using nails or staples, and seal all perimeter edges to eliminate gaps.
How to lay a mouse net? - in detail
Installing a rodent barrier requires careful planning, appropriate materials, and systematic execution. The goal is to create a continuous, taut surface that prevents mice from entering a designated area, such as a garden, greenhouse, or storage space.
Materials commonly used include:
- Fine‑mesh nylon or polyethylene net with openings no larger than 6 mm;
- Stainless‑steel or galvanized staples, nails, or U‑shaped pins;
- Heavy‑duty wire or zip ties for reinforcement;
- Measuring tape, scissors, and a utility knife;
- Protective gloves and safety glasses.
Begin by measuring the perimeter of the target zone. Record length, width, and any irregularities such as corners, doorways, or ventilation openings. Cut net sections to exceed measured dimensions by at least 30 cm on each side; the excess allows for secure anchoring and tensioning.
Installation proceeds in the following order:
- Attach the net to the highest point of the frame or wall using staples or pins, ensuring the material lies flat without folds.
- Pull the net tightly toward the opposite side, maintaining uniform tension; employ a tensioning rod or a temporary clamp if necessary.
- Secure the opposite edge with additional fasteners, confirming that the net remains taut.
- Overlap adjoining net sections by a minimum of 10 cm and fasten the overlap with wire or zip ties to eliminate gaps.
- Seal openings around doors, vents, and utility lines with mesh patches, fastening each patch firmly.
After the primary attachment, trim any excess material flush with the surface. Apply a second row of fasteners along the lower edge to prevent sagging caused by wind or animal pressure. Install a protective strip of rigid material, such as PVC or metal flashing, over the bottom edge in high‑traffic areas to deter chewing.
Final inspection involves walking the perimeter and checking for loose points, tears, or gaps larger than the mesh size. Conduct periodic checks—monthly in warm climates, quarterly in cooler regions—to tighten fasteners and replace damaged sections promptly. Maintaining a clean environment around the barrier reduces attraction for rodents and prolongs the net’s effectiveness.