How to catch five mice? - briefly
Place several baited snap or live traps along the rodents’ pathways, spacing them near walls, corners, and known foraging spots, and inspect them regularly until five are secured. Use fresh attractants and ensure traps are reset promptly to maintain capture efficiency.
How to catch five mice? - in detail
Capture five rodents efficiently by following a systematic approach. Begin with an assessment of the environment; identify entry points, nesting sites, and pathways used by the animals. Seal gaps larger than a quarter‑inch to limit re‑entry, but keep at least one access route open for trapping.
Select appropriate devices. Options include snap traps, electronic kill traps, and humane live‑catch cages. Choose models rated for a minimum of five captures to avoid overloading a single unit. Verify that each trap complies with local regulations regarding animal control.
Prepare bait that appeals to the target species. Preferred substances are high‑protein foods such as peanut butter, dried fish, or processed meat. Apply a pea‑sized amount to the trigger mechanism to ensure reliable activation while minimizing waste.
Place traps strategically:
- Along walls where rodents travel, typically within 12 inches of a baseboard.
- Near suspected nesting chambers, but not directly inside them to avoid disturbance.
- In dark corners and under clutter where sightlines are limited.
Space each device 2–3 feet apart to maximize coverage without competition. Use a staggered layout if the area is larger than 100 sq ft.
Monitor traps at regular intervals, ideally every 12 hours. Record capture times and locations to adjust placement patterns. Remove captured animals promptly; for lethal devices, dispose of carcasses according to health‑department guidelines. For live‑catch cages, release each mouse at least 2 miles away from the original site, following humane handling procedures.
Finally, conduct a post‑capture inspection. Re‑seal any newly discovered openings, clean and disinfect trap surfaces, and replace bait to maintain effectiveness. Repeating this cycle until five individuals are secured ensures complete removal while minimizing collateral damage.