How should I correctly install a mouse repeller? - briefly
Place the repeller at least 12 inches above the floor, mounting it on a wall near mouse activity zones with screws or strong adhesive according to the manufacturer’s guidelines. Connect it to power, activate the ultrasonic/electromagnetic mode, and keep the unit running continuously.
How should I correctly install a mouse repeller? - in detail
Choosing an appropriate site is the first critical step. Select a location where rodent activity has been observed, preferably along walls or near entry points. Ensure the surface is flat, dry, and free of obstacles that could interfere with the device’s ultrasonic emission. Verify that a convenient power outlet or a reliable battery compartment is within reach.
Prepare the mounting area before attaching the unit. Clean the surface with a mild detergent, dry thoroughly, and, if necessary, apply a leveler to eliminate unevenness. Use the supplied brackets or screws, following the manufacturer’s torque specifications, to secure the device firmly. Align the unit so that the front face points toward the target zone; most models include an indicator arrow for correct orientation.
Connect the power source according to the device’s requirements. For mains‑powered units, plug the cord into a grounded outlet and confirm that the voltage matches the label (typically 110‑120 V or 220‑240 V). For battery‑operated models, insert fresh cells of the recommended type, observing polarity markings. After connection, activate the unit and listen for a brief startup tone, which confirms proper power delivery.
Adjust operational settings as needed. Many repellers offer selectable frequency ranges or intensity levels; set the highest safe level for the environment, taking into account the presence of pets or children. Conduct a test run of at least 30 minutes, observing any changes in rodent activity. Record observations to determine whether further adjustments are required.
Maintain the system to ensure continued effectiveness. Schedule monthly inspections to remove dust from the speaker grille and verify that mounting hardware remains tight. Replace batteries according to the manufacturer’s schedule or when the indicator signals low power. Keep a log of maintenance actions and any notable changes in rodent behavior.